Lumeta Enterprise Edition 3.3.3.2 provides the capability to ingest and push data about your network devices to and from Rapid 7 via API.
Configuring the Rapid Feed
To configure the Rapid 7 integration:
- On Lumeta's main menu, browse to Settings > Integrations > Other Solutions > Rapid 7.
- Enable the feed by clicking the Off slider.
The label changes from Off to On. To disable the feed while leaving the credentials in place, click the slider to the Off position. - Input a Polling Interval to indicate the time that should elapse between fetching the latest feed data. Input 24 to poll daily, input 12 to poll twice a day, and so on.
- Input the IP address or system name of your Rapid 7 server.
- Input your Rapid 7 credentials.
- If you select the Asset Mapping by Zone checkbox, you can push data for any and all zones you select to Rapid7. If you don't check it, or if you check it but don't select any zones, data will not be pushed to Rapid7.
- Click Submit.
The configuration is saved. Devices ingested from Rapid7 are stored in the "rapid7_managed_hosts" table.