Lumeta Enterprise Edition 3.3.3.2 provides the capability to ingest and push data about your network devices to and from Rapid 7 via API.
Configuring the Rapid Feed
To configure the Rapid 7 integration:
- On Lumeta's main menu, browse to Settings > Integrations > Other Solutions > Rapid 7.
- Enable the feed by clicking the Off slider.
The label changes from Off to On. To disable the feed while leaving the credentials in place, click the slider to the Off position. - Input a Polling Interval to indicate the time that should elapse between fetching the latest feed data. Input 24 to poll daily, input 12 to poll twice a day, and so on.
- Input the IP address or system name of your Rapid 7 server.
- Input your Rapid 7 credentials.
- Indicate whether you would like to push data to a Rapid7 site:
- Push all - By default (i.e., with the Asset Mapping by Zone checkbox cleared), assets for all zones will be pushed to the single site called "Lumeta Global" in Rapid7.
- Push some - If you would like to push only some zone details to Rapid7, select the Asset Mapping by Zone checkbox, and in addition check those zones you want to push. A site named for each selected zone will be created in Rapid7.
- Push none - If you don't want to push any data to Rapid7, check Asset Mapping by Zone and clear all the zone checkboxes.
- Click Submit.
The configuration is saved. Devices ingested from Rapid7 are stored in the "rapid7_managed_hosts" table.