A Lumeta admin or superuser can configure connectivity between the Lumeta Command Center and the BlueCat server to compare and share IP address management findings.
Here's how:
Log in to Lumeta as an admin or any user with superuser privileges.
On the main menu, browse to Settings > Integrations > Other Solutions > BlueCat.
Complete the configuration form and click Submit.
Field | Description |
---|---|
Polling Interval | How often (in hours) Lumeta should poll the BlueCat gateway |
Server Name | The server name or IP address of the BlueCat gateway |
Username | User account to the BlueCat gateway |
Password | Password to the BlueCat gateway |
Add unmanaged devices with no network block defined |
|
Option | Behavior |
No zones are enabled | No assets will be pushed to BAM |
One zone is enabled however, no configuration is selected under BlueCat Configuration Name | User has to select a configuration in order to push assets to BAM. No assets will be pushed to BAM |
One zone and one configuration is selected | Lumeta would identify all ip addresses discovered under selected zone and add ip addresses under selected configuration |
Two zones and two configurations are selected | Lumeta would identify all ip addresses discovered under selected zones and add ip addresses under selected configuration for the ip address that don't exist in selected configuration for that zone |
Enable the integration by toggling the Active control from red to blue.
The message "Product configured properly" will display.
Install the BlueCat Plug-in if you have not done so already.
Review the results on the BlueCat Management dashboard.