A Lumeta Asset Manager admin or superuser can configure connectivity between the Lumeta Asset Manager Command Center and the BlueCat server to compare and share IP address management findings.
Here's how:
Log in to Lumeta Asset Manager as an admin or any user with superuser privileges.
On the main menu, browse to Settings > Integrations > Other Solutions > BlueCat.
Complete the configuration form and click Submit.
Field Description Polling Interval How often (in hours) Lumeta Asset Manager should poll the BlueCat gateway Server Name The server name or IP address of the BlueCat gateway Username User account to the BlueCat gateway
Password Password to the BlueCat gateway Retrieve Configurations Fetches network configurations from the gateway Add unmanaged devices with no network block defined - Select to create a new addresses device in BlueCat Address Manager (BAM) without even when there is not a container network address blocksblock for the device.
Clear to NOT create new addresses a device in BlueCat Address Manager (BAM) with network address blocks. when a container block does not exist for the device.
Option
Behavior
No zones are enabled
No assets will be pushed to BAM
One zone is enabled however, no configuration is selected under BlueCat Configuration Name
User has to select a configuration in order to push assets to BAM. No assets will be pushed to BAM
One zone and one configuration is selected
Asset Manager would identify all ip addresses discovered under selected zone and add ip addresses under selected configuration
Two zones and two configurations are selected Asset Manager would identify all ip addresses discovered under selected zones and add ip addresses under selected configuration for the ip address that don't exist in selected configuration for that zone Enable the integration by toggling the Active control from red to blue.
The message "Product configured properly" will display.
Install the BlueCat Plug-in Plugin if you have not done so already.
...