Enabling the NetFlow Capture Service

The NetFlow-capture service enables your Spectre Command Center to ingest NetFlow data.

To enable NetFlow capture from the Spectre GUI:

  1. On the Spectre main menu, browse to Settings > Support Tools > Status of Spectre Components.
  2. Start the Netflow Packet Capture Service and click Run.

    The status of the service will change to Running.

To enable NetFlow capture from the Spectre command-line interface:

  1. Log in to the CLI.
  2. At the command-line prompt, enter support service packetcapture start.
  3. Exit the CLI.