Checking the Status of SNMP & SNMP Walk

FireMon recommends that you disable FIPS, if you're using weak ciphers like MD5 or DES to avoid an snmpwalk failures.

To use SNMP Walk:

  1. In Reports, identify a device that responds to SNMP—an "snmpresponder".


  2. On the Asset Manager main menu, browse to Settings > Support Tools > SNMP Status & SNMP Walk.
    Notice that the information you will need to input changes depending on whether you selected  SNMPv2, SNMPv3 MD5, or SNMPv3 SHA as your credential type.
    Do not use an @ symbol in the credentials. This can cause an error. 

    SNMPv2 SNMPv3-MD5 SNMPv3-SHA

  3. Click Fetch SNMP Data.
    The SNMP management information displays.