Manage Zones

To manage a variety of zones, you'll need to know how to add, edit and delete them.

Add a Zone

To add a zone, do the following: 

  1. Browse to the Settings >Zones page.

  1. Click Add.

  1. Set properties for your zone, using an informative name and description so that you and other Asset Manager system users with access to the zone can recognize its purpose or unifying characteristic. Zone names can be a combination of alphanumeric characters and special characters and can start with number.

The maximum number of characters for a user name is 32. Special characters except for apostrophes (') are allowed.

  1. Click Add.
    Your new zone displays on the left in the Available Zones list.
    If your new zone doesn't display within 90 seconds, an application error has likely occurred, and the operation has timed out. You can log in to your Command Center again to finish adding the zone.

Edit a Zone

To edit a zone, do the following:

  1. Browse to the Settings >Zones page.
  2. Select the zone you want to revise, and then click Edit.
  3. Revise the settings as needed.
    Set properties for your zone, using an informative name and description so that you and other Asset Manager system users with access to the zone can recognize its purpose or unifying characteristic. Zone names can be a combination of alphanumeric characters but cannot start with number.

The maximum number of characters for a user name is 32. Special characters are not allowed.

  1. Click Edit. 
    Your revised zone displays on the left in the Available Zones column.

Delete a Zone

To delete a zone, do the following:

  1. Browse to the Settings >Zones page.
  2. Select the zone you want to delete, and then click Delete. 
  3. Click Delete Zone to confirm the deletion.
    The zone is deleted.